- SUPER FAST Nationwide Delivery Any Size Gate/s despatched in approximately 25 working days from order.
Shrewsbury Straight Matching Side Panel
£150.00
They are made to the exact dimensions of your chosen gate, 70mm thick, with the horizontal bracing running at the same height as your chosen gate/s, making these the perfect match to finish your gate project professionally. To ensure that all our Matching Side Panels are of the highest quality, our skilled craftsmen hand-make each matching side panel to your bespoke measurements. Wortley Brothers are the only UK-based wooden gate manufacturer to offer custom sizes made to the millimetre. At nearly three inches thick (70mm), our matching side panels are constructed using a heavy-duty planed 95 x 70 mm framework, fully planed tongue and groove boards and marine grade stainless steel pins, employing time honoured carpentry skills, mortise and tenon joints are created which are then glued and dowelled to fortify them for maximum strength.
We only use the very best premium grade Scandinavian Redwood timber and African Iroko Hardwood. All this, and Wortley Brothers can fully manufacture and deliver your made-to-measure matching side panels in the United Kingdom fastest made-to-measure lead time.
- Premium Grade Wood
- Made-to-Measure
- nationwide delivery
Configure your product
Our Customers Love…
Configure & Buy
Configuration Guide
Height
Here are our three simple steps to help you measure the height for your new side panel:
- Measure the total height from the floor to the top of the gate post.
- Minus 30mm for the clearance gap below the side panel.
- Finally, these measurements will leave you with a total height for your side panel.
Example:
Total Measured Space = 1500mm
Minus Clearance Gap: 1500mm – 30mm = 1470mm
Total Height to Order = 1470mm
We will manufacture your gate to the exact height measurement you order, without deducting any tolerances or gaps. Therefore, it’s important you take these off in your own measurements.
Width
Here are our four simple steps to help you measure the width for your new side panel:
- Measure the total space you have for everything to fit into, including the new side panel, posts, and a clearance gap.
- Minus the widths of any posts you require.
- Minus your clearance gap, which will be 5mm total.
- Finally, these measurements will leave you with a total width for your side panel.
When taking the width measurement, make sure you are measuring from the front view.
Example:
Total Measured Space = 1500mm
Minus Posts: 1500mm – 290mm (2 x posts at 145mm each) = 1210mm
Minus Clearance Gap: 1210mm – 5mm = 1205mm
Total Width to Order = 1205mm
We will manufacture your gate to the exact width measurement you order, without deducting any tolerances or gaps. Therefore, it’s important you take these off in your own measurements.
Wood Types
At Wortley Brothers, we offer two premium wood types. Both Scandinavian Redwood and African Iroko Hardwood are premium grade wood.
Our wooden gates and garage doors are handmade and manufactured in-house using these wood types by our team of skilled experts.
Scandinavian Redwood
This premium grade timber experiences minimal moving, swelling, shrinking or warping, which ensures that your new product will stand the test of time.
Our Scandinavian Redwood costs us 35% more than standard timber – a cost which we carry ourselves and do not reflect back in our prices to you.
African Iroko Hardwood
Treatments
Our range of natural stains and colours for your wooden gates or garage doors are available to purchase in two applications:
- Premium Factory Finish: We apply your chosen treatment in-house before delivery.
- At-Home DIY Finish: You purchase the coating to apply yourself.
These applications are also available for our colour matching service, where our treatments can be colour matched to suit your gates.
Home Finish
Our home finish treatment is a true DIY application. There’s no preparation needed; simply apply this treatment directly onto your gates using a brush or sprayer. After two hours, apply a second coat for ultimate protection. Dried and ready to use within a few hours.
Factory Finish
We are proud to offer a full factory finish to your new wooden gates or garage doors. Our team will professionally spray two high-build coats of your chosen treatment, ensuring ultimate protection and visual impact. Your new product will be sent to you fully treated and ready to install.
For any further guidance, please contact our friendly team today.
Got a Question?
At Wortley Brothers, we’re more than happy to provide our customers with all the answers, advice, and guidance they need.
Check out our FAQs to see if we’ve already answered your question, or get in contact with us and our friendly team will be in touch soon.
Frequently Asked Questions
Installing a side panel can be challenging, especially as they are stationary and need to be securely fixed to a solid post on either side. Have a read through our free installation guide in regards to fixing our products to a post.
For any further assistance, please contact our team.
We can manufacture the width of your side panel to match your wooden gates, with our friendly expert team providing their knowledge on the best width that will work with your gates. Our made-to-measure service means that we can custom manufacture side panels to the millimetre that you need.
If you need support with how to measure up to suit your gate project, please contact our friendly team who will be happy to help.
Yes, our range of side panels are made-to-measure. We can manufacture them to perfectly match your chosen gate’s style, size, and design, ensuring a visually stunning and consistent overall appearance.
Check out our product range
What Our Customers Say…
Got an Enquiry?
If you’ve already got something in mind, send us your thoughts, inspiration images, or even a sketch, and we will get in touch to discuss your options.